FS Series Replacement Powered Live Conveyor System Rollers
FS Series Conveyor Roller Bearing Assemblies
- F143ZZ Roller Bearing Assembly
- F158ZZ Roller Bearing Assembly
- F158ZZREV1 Roller Bearing Assembly
- F19ZZ Roller Bearing Assembly
- F19ZZREV1 Roller Bearing Assembly
Documentation
- Conveyor Roller General Information
- Convyor Roller Ordering Information
- Conveyor Roller Full Line Catalog
You will need the Adobe Acrobat Reader to view our PDF documentation.
FS Series Replacement Conveyor Rollers
Conveyor System Rollers - The Next Generation. Rolcon is proud to introduce the the FS Series replacement conveyor roller - the next generation in conveyor system roller technology.
Rolcon has developed a revolutionary conveyor roller specifically designed to eliminate conveyor system frame wear and drastically reduce noise levels allowing you to substantially reduce conveyor system maintenance costs. At the heart of this innovative design is Rolcon’s patented roller axle. Made of a molded thermoplastic polyurethane reinforced with a steel pin, the roller axle has a spiral-hex tip that allows for perfect roller conveyor installation every time. Most importantly, there is no metal to metal contact between the roller axle and the conveyor system frame since the axle is made of cut resistant, high abuse polyurethane. This means that the FS Series Conveyor Roller will never wear out your conveyor system frames – NOT EVER! Combined with a precision bearing, the FS Series Conveyor Roller is the quietest roller available for your material handling conveyor system.
Benefits and Features
- No Frame Wear – EVER:
Due to the thermoplastic polyurethane axle Rolcon can guarantee the FS Series will never wear out the conveyor frame. MORE IMPORTANT if your frames are beginning to show wear the FS Series will eliminate further wear, saving you the cost of replacing the frames or system. - Substantial Reduction of Noise Levels:
the FS Series uses a 6203ZZ precision bearing. This along with no metal-to-metal contact of axle and frame can reduce noise levels by as much as 10 decibels. - Reduction of System Damaging Vibration:
Because all rollers are unbalanced running your conveyor at high speeds causes vibration that is transferred to the frame and magnified due to metal-to-metal contact. The FS Series significantly reduces this vibration transfer saving bearings, motor mounts, switches, electronics and your frames. - 30% Lighter Than Standard Rollers:
Because of the axle construction, the FS Series is 30% lighter than a conventional roller. This means less freight charges, no damage to the frame and less employee fatigue during installation. - Self Aligning Hex Axle Reduces Installation by 50%:
The patented spiral hex on the axle allows the axle to align itself during installation. This is especially handy in overhead applications. - Axles are Independently Spring Loaded:
Since the axles are independently spring loaded it doesn’t matter which end you install first. Just push and go. - Greater Bearing Life:
There is no side load on the inner race of the bearing from the axle spring. No side load means far greater bearing life.
Our Guarantee
Because of these seven unique benefits Rolcon offers a 90-day unconditional money back guarantee on the FS Series roller. If you try them and are not completely satisfied just send them back for a full refund. In addition Rolcon can guarantee the bearing for 10 years in most applications.
The FS Series conveyor roller is truly the next generation of conveyor roller system technology. Act now and save time and money. Make the switch to the FS Series Replacement Conveyor Roller. Contact us today »